Thru Axle for BOB Trailer: 152 to 167mm with 1.0 Thread
$ 62.00
Yes! A 12 mm thru-axle adapter for BOB Trailers.These Robert Axles for BOB Trailers are specifically engineered to attach the proven BOB Trailer to your thru-axle equipped bike.
Take full advantage of your modern bike with 12 mm thru-axles and harness the rigidity of the thru-axle to haul your BOB Trailer. Set out on any adventure, big or small. Great for off-road tours, trail building, hauling cargo and more!
Description
Since 2013, we have been an important part of cyclists’ adventures all over the world. Our BOB Trailer thru axles have millions of miles on them in mountain bikes and road bikes, carbon bikes, fat bikes and e-bikes. Our axles are specifically designed to handle the high-torque loads generated by e-bikes.
Our BOB Trailer axles are not just designed in the USA, but are made here as well. They are machined by avid cyclists, to the tightest standards in the industry. We safety test, to failure, every batch of axles we produce to ensure they exceed your expectations.
WARNING: This product can expose you to chemicals including nickel acetate, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Additional information
Weight | 0.3125 lbs |
---|
Chris Staggers (verified owner) –
Excellent product. I’m using on my Specialized Diverge and it works great.
Darren Hooson (verified owner) –
This axle is well made and fills a need.
Made my Bob trailer useable on my new bike.
Excellent service, in stock, and about a week to deliver to Victoria B.C.
I bought the bobbins as well to keep the original Bob axle for my older bike.
Thank you Robert Axle Project.
Stéphane (verified owner) –
Excellent product, well manufactured, easy to install.
Very fast delivery.
It made my bob Ibex usable with my new Specialized Sequoia, and saved my road bike travel through the alps
Jeff Dengel (verified owner) –
In an age of ever-changing industry standards it is increasingly difficult to retrofit product. Marrying my B.O.B. trailer (bought in 2007) to a 2017 Tallboy simply wouldn’t be possible without this axle. The tolerance, finish and ease of use are indicative of well designed product… further, it’s noticeable that the designers use the product themselves!
Marc Garoutte (verified owner) –
I ordered a 12mm BOB axle for my 2015 Gen 3 carbon Santa Cruz Nomad outfitted with the Kranked Bikes Electric 2,200 watt motor. It installed easily with some parts left over (I assume they were for other bike fitments). I also bought and installed the RAP bobbins.
Note: I had to spread the BOB trailer attachment arms out about a 1/2″ to get them onto bobbins.
A week of running logging roads with a 50 lb load on trailer was a non issue. Everything worked and nothing came loose.
I will be looking to get the 12mm trainer axle for my Santa Cruz Tallboy next
Dave (verified owner) –
“I thank you, and my 2013 Santa Cruz Nomad thanks you too. So glad you guys are serious about finding a fix to this BoB thru axle delema. Your customer service was fantastic. You helped me order the correct axle. The axle arrived a day early, which was awesome.Taking it out of the packaging it is a beautifully engineered piece of work. When it came with extra parts and installation instructions I was a little nervous as I’m not that mechanically inclined. (Also, this is my first ‘thru’ axle bike, so you know…) However, it installed easily and fit perfectly, no extra parts needed. I’ve had it out on several loaded rides. My BoB Ibex loaded with all of my camping gear and 6 gallons of water too!
Dreaming of a 4 day self supported tour on the White Rim trail for my 60th Birthday.”
Dave
Truckee, Ca.
Shanour Moens (verified owner) –
Thank you for keep me going on my adventures after getting myself a Specialized Diverge.
The Holy trinity for traveling is .My bike; My BOB and Me!
The axle fits like a glove and am stoked to take it around Europe and further…….
Delivery to Amsterdam, The Netherlands was a non issue as i could trrack it all the way from US to my home in less than 10 days!!!!!
Thank you so much!!
Love,
Shanour
Bill M (verified owner) –
Axle arrived in a timely manner, just as advertised. No surprises, no hassle. Thanks for a great product to help with my first bikecamping adventure. Bill M.
Fernando Cubillos (verified owner) –
works neatly for my thru axle gravel bike (Diverge), which I can attach the BOB trailer. My dog loves it!
Great communication with seller, fully recommended
Javier (verified owner) –
Fit perfect to my Santa Cruz mountain bike. Shipping service no problem! Dreams come true! Thanks!
Rob Olykan (verified owner) –
I was searching for a solution to attache my Bob to my new purchased 2019 Cannondale e-bike, that has a thru axle while i was used to attache it with a conventional quick release. Robert Axle clearly saw the gap in this market. I ordered one and to my surprise it was delivered within 3 days! The axle is really a quality product. Unfortunately the guide lines on the order form were not 100% correct so I had to return my axle to US for one 5 mm longer. Despite this inconvenience I strongly recommend this axle to anyone who is still in doubt. I can’t wait to install my Bob again.
Ton (verified owner) –
Support provided by the Robert Axle project is perfect. Quickly answering questions and delivery is very fast. Recommended!
Sasha Land (verified owner) –
The axle was really nicely machined and high quality. I was stoked to find an option to pull my BOB with a Specialized Crux. Worked perfectly!
Jason Schroeder (verified owner) –
dead-on perfect fit for my slightly unusual thru-axle spacing… they even knew what “SCS” is (see ~2016 to 2010 Specialized bikes)…
Its even pretty good on weight; not the ultralight 20 gram skewers I had grown to love, but for a 12 mm thru, the weight is pretty impressive.
I have added the Old Man Mountain rack and it appears rock-solid (and was pretty intuitive to install, too). I am ready for bikepacking… go RAGSLOD!!!
Francis (verified owner) –
Great service and great fit for my bespoke tandem – the sizing chart and help were really useful
Francis Madden (verified owner) –
Great fit and service – size charts and guides really helped to get the right product for my bespoke tandem
Cody (verified owner) –
Bought this to add braze-on screw holes for my Canyon Grail bike because it does not have holes for rear racks. The packaging that this thru axle came in was great and shipping was relatively fast.
Stan rathbone (verified owner) –
I recently purchased the BOB 117 axle to tow my BOB trailer. I found these folks great to work with in helping me decide exactly what I needed. The axle arrived quickly and looks like a quality product. I was unable to make a planned trip and consequently haven’t been able to use the axle but i have no doubt it will perform wonderfully.