Thru Axle for BOB Trailer: 229mm with 1.5 Thread

(9 customer reviews)

$ 69.00

Yes! A 12 mm thru-axle adapter for BOB Trailers. These Robert Axles for BOB Trailers are specifically engineered to attach the proven BOB Trailer to your thru-axle equipped bike.

Take full advantage of your modern bike with 12 mm thru-axles and harness the rigidity of the thru-axle to haul your BOB Trailer. Set out on any adventure, big or small. Great for off-road tours, trail building, hauling cargo and more!

In stock

Get 20% Off Lightning Bolt-on Axles With Purchase of Any Trailer or Trainer Axle! Discount Automatically Applied.
SKU: BOB108 Category:

Description

Since 2013, we have been an important part of cyclists’ adventures all over the world. Our BOB Trailer thru axles have millions of miles on them in mountain bikes and road bikes, carbon bikes, fat bikes and e-bikes. Our axles are specifically designed to handle the high-torque loads generated by e-bikes.

Our BOB Trailer axles are not just designed in the USA, but are made here as well. They are machined by avid cyclists, to the tightest standards in the industry. We safety test, to failure, every batch of axles we produce to ensure they exceed your expectations.
 

Prop65 Warning icon

WARNING: This product can expose you to chemicals including nickel acetate, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Additional information

Weight 0.3125 lbs

Specification

A thru-axle adapter for BOB Trailers! These Robert Axles for BOB Trailers are specifically engineered to attach your BOB Trailer to your 12 mm thru-axle equipped bike.

  • This axle is compatible with BOB Trailers.
  • The true length of the axle shaft is 229 mm. Please note: Thru-axle lengths do not equal hub standards. An axle has to be longer than the hub to fit in the frame. A 12×197 hub does not equal a 197 mm long axle.
  • This axle has a 1.5 mm thread pitch.
  • The axle shaft and axle end are precision CNC machined.
  • The axle shaft is 7075 aluminum and hard black anodized for rugged durability.
  • The axle ends are stainless steel, which allow for mounting of the BOB Trailer bobbins.
  • No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench.
  • Please note: This axle does not come with the BOB Trailer bobbins. Those are available separately, here. Or you can reuse your bobbins from the stock BOB Trailer Quick Release that came with your trailer.
  • Designed, built and quality tested in the USA. Proven around the world.

Support

Need more information about how our axles work?

9 reviews for Thru Axle for BOB Trailer: 229mm with 1.5 Thread

  1. Tony V (verified owner)

    Great price quick shipping to Calgary, Alberta, Canada. Fit is perfect, my fat bike is all set to go hunting with a trailer in tow. thanks

  2. Bill (verified owner)

    I have used my bob trailer behind my 5″ tired fat bike with thru axles everyday for two weeks now. The Robert Axle works PERFECT!!!!!

    Shipping to Arizona was like one day!!! Super fast. Install and testing was about half an hour total.

    This is a high quality item and after two weeks I am totally satisfied and will order again from you guys.

    Thanks,
    A man on his fat ebike and his dog on a BOB cargo trailer.

  3. Charles D Semmler (verified owner)

    I was having great difficulty getting a cargo rack setup that would work for my Framed Minnesota fat tire bike. The staff at Robert Axle were very helpful and directed me to the right axle that would work with a particular rack. So I ordered the rack and the BOB axle and it all went together like I was told. I have not had the opportunity to actually use the rack, but finding a combination of axle and rack that would work was great. The support was much appreciated.

  4. Peter (verified owner)

    This axle fit my bike perfectly, after wandering aimlessly trying to figure out what size axle I had, trying to measure in inches and convert to millimeters, etc. They walk you through the whole process and sent me just what I needed. Thank you!!

  5. Peter Blank (verified owner)

    This axle fit my bike perfectly, after wandering aimlessly trying to figure out what size axle I had, trying to measure in inches and convert to millimeters, etc. They walk you through the whole process and sent me just what I needed. Thank you!!

  6. Bundy Phillips (verified owner)

    Top quality thru axle for adapting BOB trailer yoke to fit both my fat bike and midfat bike. I really like these axles, they are reliable and strong,,,even better than the standard 9-mil skewer that BOB supplies. Once the BOB trailer yoke is bent to fit the Robert Axle the trailer feels bomb-proof while towing. I am really glad that Robert Axle Project is there to fill the gap between newer bikes and the BOB trailer !!

  7. George

    I ordered my Thru Axle and was a little worried it would not work, but it worked perfect! Thanks to Tory with customer support for answering my questions suoer quick! It took less than a week to get it delivered to Santa Barbara. I attached my new thru axle and was able to tow my Bob Yak trailer for the first time this past weekend! Thank you!!

  8. Gibo (verified owner)

    Made well and fit great. A quick trip to the hardware store for some washers and bolts and my trailer clicked into place and hauls just like it should.

  9. John (verified owner)

    Excellent product and customer service

Add a review

Your email address will not be published. Required fields are marked *

You may also like…

  • BOB Trailer pin and lanyard

    BOB Trailer Pin and Lanyard

    $ 8.50
    Read more
  • 12mm rear thru axle for fat bike FAT-LIG-12mm-rear

    Lightning Bolt-on Axle – Rear 12 mm x 229 mm x 1.5 Thread

    $ 48.00
    Add to cart
  • Inner tube for BOB Trailer tire

    Inner Tube for BOB Trailer

    $ 8.50
    Add to cart
  • BOB Trailer bobbins

    RAP Bobbins – Pair

    $ 18.50
    Add to cart